Joel "MetroGTI" Dirnberger Designs EPP BluFO

Customers are always asking me "What do I need to complete this kit?"
This page contains all the pieces specifically for building and flying the EPP BluFO.
You will need batteries, a transmitter and a receiver as well.

Go To Home Page
Go To Order Form
Contact Us

A Video review by Jim T. Graham from RCGroups.
Click image to play.

Joel is MetroGTI on RCGroups

Joel was inspired to come up with his design after he took some liberties with the original Blue Foam Wonder which itself has been around for sometime. He both stylized it even more and developed a better flying aircraft to boot. The name reflects the fact that the originals were built out of blue fanfold foam. Several additional variations have evolved including an EDF version and a couple of float planes. The current EPP version which is very durable for full contact combat events and FPV.

EPP BluFO (unpainted)
$39.95

The link below will always contain the latest instructions which might be more up to date than the paper copy included with the kit. Plus you can click on the pictures and get large color versions to better see details.

EPP BluFO Instructions

The BluFO discussion and build log can be found at: http://www.rcgroups.com/forums/showthread.php?t=1655800

The BluFO YouTube video playlist.

A Real Flight model of the BluFO has been uploaded to the Real Flight Forum site and can be downloaded here.

FPV BluFO in Flight
An FPV BluFO in Flight
Click to Enlarge

RECOMMENDED PARTS AND ACCESSORIES

Replacement Hatch

It has come to our attention that people have been losing hatches in flight
and in some cases they have gone through the prop, destroying them. So
we are offering a replacement hatch kit including the magnet.

$10.00 each
BluFO Completer
Completer for the BluFO kit
Emax CF-2812 (1600 Kv)
20 amp ESC
2 x 9gram Servos
We reserve the right to make equivalent product substitutions when availability requires.

$44.95 each Quantities Limited.
Picture of the Mini Gremlin/Blufo completer set
Click to Enlarge
O-Rings for use as Prop Savers for the Standard 9mm EPP,
3D Delta V2 and Blufo Completers. Dash Number 114
3/32" fractional width, ID 5/8", OD 13/16"

$1 for a bag of 10
Prop Saver O-Rings

GemFan Direct Drive 8x4 props used with 3S on our 9mm EPP Extras and Yak55s, our Warbird Series, our 3D Delta V2 and BluFOs.

$1.50 each
Colors may vary. We try to purchase black or gray but sometimes we have to get orange until they come back in stock .
picture of 
								GWS Props
Click to Enlarge
Beacon Foam-Tac

An excellent glue for bonding Carbon Fiber, EPP and Depron planes. Can be used to make a living EPP or Depron hinge. Stays flexible unlike foam safe CA. Now available in 2oz tubes (with or without nozzle), 1oz tube or the 6-pack of the 5ml tubes (1.014oz total).

Beacon Foam-Tac (please select size)
$15.00 per 2oz bottle with nozzle,
(Nozzle can be moved from tube to tube)
$13.00 per 2oz bottle without nozzle,
$8.00 per 1oz tube,
or
$8.00 for a package of six 5ml (Mini) tubes
.
Quantities Limited.

picture of 2oz Foam-Tac with nozzle picture of 2oz Foam-Tac without nozzle picture of 1oz Foam-Tac picture of 5ml Foam-Tac Minis
Click to Enlarge

Creation date: Sunday December 11, 2016
Last updated: Friday December 9, 2022

For more information send email to RA Cores

Go To Home Page
Go To Order Form
Contact Us